TRUNNANO | Ceramic powder, graphite powder,boron powder, and 3D printing metal Nanomaterial supplier & Manufacturer.
From April the French government will reduce fuel taxes slightly to ease the burden on consumers.
Warned of possible energy shortages in France by the end of the year and called on the French to conserve electricity and gas from now on, saying that if nothing was done, The energy situation will be tough this winter. Some experts say that there are two main reasons for France's energy crisis: first, the conflict between Russia and Ukraine affected the gas market and caused supply tension; The second is a safety review of France's newest nuclear power plant, which may lead to a reduction in output this year. In order to alleviate the energy crisis, the whole French society needs to be mobilized, whether it is the industrial sector, the tertiary sector or every French citizen. Now it is urgent. Rising fuel prices may also have an impact on shipments of the MoSi2 Powder.
About Molybdenum Silicide MoSi2 Powder:
MoSi2 is an intermetallic compound, molybdenum silicide is a refractory ceramic, mainly used for heating elements. It has a medium-density, a melting point of 2030 ° C, which is electrically conductive. At high temperatures, it forms a passivation layer of silica to protect it from further oxidation. The thermal stability of MoSi2 and the thermal stability of its high radiation make such materials and high radiation coatings in thermal shields from the atmosphere as they are used next to WSI2. MoSi2 is a material with a four-square crystal structure (α-modified) gray metal; its β-modification is hexagonal and unstable. It is insoluble in most acids but is dissolved in nitric acid and hydrofluoric acid.
Although MoSi2 has excellent oxidation and high Young's modulus at temperatures above 1000 ° C, it is brittle at lower temperatures. Moreover, at 1200 ° C or more, it will lose creep resistance. These properties are limited to their structural materials but can be shifted by using it as a composite with another material.
Molybdenum disilicide (MoSi2) is a promising candidate material for high-temperature structural applications. It is a high melting point (2030 C) material with excellent oxidation resistance and a moderate density (6.24 g/cm3). However, low toughness at low temperatures and high creep rates at elevated temperatures have hindered its commercialization in structural applications. Much effort has been invested in MoSi2 composites as alternatives to pure molybdenum disilicide for oxidizing and aggressive environments. Molybdenum disilicide-based heating elements have been used extensively in high-temperature furnaces. The low electrical resistance of silicides in combination with high thermal stability, electron-migration resistance, and excellent diffusion-barrier characteristics is important for microelectronic applications. Feel free to send an inquiry to get the latest price if you would like to buy Molybdenum Silicide MoSi2 Powder in bulk.
Characteristics of Molybdenum Silicide MoSi2 Powder:
Molybdenum silicide MoSi2 powder (CAS 12136-78-6) has high melting point, high corrosion resistance, high oxidation resistance, good electrical conductivity, high temperature ductility, a binary alloy system the intermediate phase, dual characteristics of metals and ceramics.
Technical Parameter of Molybdenum Silicide MoSi2 Powder:
|Product Name||MF||Purity||Particle Size||Melting Point||Density||Color|
|molybdenum silicide||MoSi2||99%||5-10um||2030℃||6.24g/cm3||dark gray|
Chemical Composition of Molybdenum Silicide MoSi2 Powder:
How is Molybdenum Silicide MoSi2 Powder produced?
Molybdenum disilicide and MoSi2-based materials are usually made by sintering. Plasma spraying can be used to produce dense monoliths and composite forms. The material produced by this method may contain a certain proportion of β-MoSi2 due to its rapid cooling.
Applications of Molybdenum Silicide MoSi2 Powder:
Molybdenum disilicide heating elements can be used for temperatures up to 1800 ° C, in electric furnaces used in laboratory and production environment in the production of glass, steel, electronics, ceramics, and in heat treatment of materials. Molybdenum disilicide is used in microelectronics as A Contact Material.
MoSi2 is a conductive silicide that has an oxidation property due to a stable silica layer on its surface at a high temperature.
Although the top MoSi2 element can operate at temperatures up to 1800 ° C, the material is very brittle, which may suffer serious creep during use. However, they have process advantages because they can work under high electrical loads without aging, and will not exhibit increased resistivity during use. They have antioxidant properties in air, oxygen and oxygen-rich atmosphere.
Moreover, they can be used with ammonia, nitrogen, hydrogen, a rare gas, and limited vacuum, but due to the failure of the protective oxide layer, the operating temperature and life can be reduced.
MoSi2 elements are ready-made elements and can be made into a bending or straight form of a variety of sizes. These elements are mainly used in production furnaces and laboratory furnaces in ceramics, glass, steel, electronics and heat treatment industries.
Amazingness and high-temperature elasticity make MoSi2 a very promising material for high-temperature applications such as gas turbine engines. Many researchers strive to improve high temperature creep resistance and low-temperature ductility. However, there are no commercially available composites with all preferred features.
SEM of Molybdenum Silicide MoSi2 Powder:
XRD of Molybdenum Silicide MoSi2 Powder:
Packing & Shipping of Molybdenum Silicide MoSi2 Powder :
We have many different kinds of packing which depends on the molybdenum silicide MoSi2 powder quantity.
Molybdenum silicide MoSi2 powder packing: vacuum packing, 100g, 500g or 1kg/bag, 25kg/barrel, or as your request.
Molybdenum silicide MoSi2 powder shipping: could be shipped out by sea , by air, by express as soon as possible once payment receipt.
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
If you are looking for high-quality MoSi2 powder, please feel free to contact us and send an inquiry. ([email protected])
Molybdenum Silicide Properties
|Other Names||molybdenum disilicide, MoSi2 powder|
|Appearance||Gray to Black Powder|
|Melting Point||1900-2050 °C|
|Solubility in H2O||N/A|
|Electrical Resistivity||0.0000270 - 0.0000370 ohm-cm|
|Specific Heat||0.437 J/g-°C (23 °C)|
|Tensile Strength||185 MPa (Ultimate)|
|Thermal Conductivity||66.2 W/m-K (23 °C)|
Molybdenum Silicide Health & Safety Information
US President recently decided to invoke a Cold War-era defense law to encourage domestic MnO2 powder. What is Manganese Dioxide MnO2?Manganese dioxide is an inorganic compound with the molecular formula MnO2. This black or brown solid is…
Boron carbide (B4C) is an extremely hard boron-carbon ceramic and covalent material used in tank armor, bulletproof vests, engine damage powder, and many industrial applications.…
As the world deals with potential supply shortages, oil prices are soaring again, with more dramatic spikes and sudden drops expected.For consumers, that means more expensive gas for longer - prices at the pump remain above $4 a gallon. For the econo…